If you live on the North Shore, you’re used to high humidity and bathrooms that may rapidly become places where mold and mildew grow. These tenacious intruders often crawl along tiles and become stuck in grout lines, making an area that should be clean and new look considerably less welcoming. Scheduling regular tile cleaning North Shore services is a great way to keep mold at away, but there are also a lot of easy things you can do to stop it from becoming a big problem. More info!
First and foremost, make sure there is good airflow in your bathroom. Steamy showers can be enjoyable, but the water they leave behind loves to stick to everything and help mold develop. Turn on the exhaust fan as soon as you get in the shower, and leave it on for at least 20 to 30 minutes after you get out. No fan? Open a window or keep the bathroom door slightly ajar to let in a continuous stream of fresh air. Even a light wind can do a great job of keeping moisture in check.
Next, step up your cleaning routine. Don’t just wipe off the surfaces; pay careful attention to the grout lines where mold initially starts to grow. Once a week or so, take an old toothbrush and gently scrub those spots. To make a cleaner that is good for the environment, mix equal amounts white vinegar and water, spray it on the tiles, let it sit for a while, and then scrub it off. Vinegar gets rid of a lot of spores that are still around. A 3% hydrogen peroxide solution might give you an extra layer of protection in harder situations.
Another important step that is often forgotten is drying things properly. Use a squeegee to quickly clean the tiles and shower screens after every shower. Have a small towel on available to dry out shelves, corners, and other places that get wet often. Standing water is a great place for mold and mildew to grow, so taking a few minutes to dry everything off can help a lot.
Baking soda is an excellent choice if you already have some mold or mildew that won’t go away. Mix water with the paste and spread it over the stained grout. After 15 minutes, use a brush to scrub. This procedure works best in places that are often wet or hard to get to, like tiles behind toilets or under sinks. Check these less obvious places at least once a month. If you do, you won’t have to do a lot of cleaning later.
Also, make sure to do more than simply clean your grout and tiles. If you see cracked grout or tiles that are loose, fix or seal them right away. Moisture and mold spores love to hide in gaps and leaks.
You can maintain your North Shore bathroom tiles clean and shiny by making sure they get enough air, cleaning them often, drying them properly, and fixing them right away. This will keep mold and mildew away for good.
Ultra Brite Carpet & Tile Cleaning North Shore
79-83 Longueville Road, Lane Cove NSW 2066
(02) 8015 5143